Xtreme Coatings Technical Information

Xtreme Protective Coatings Pty Ltd -

Technical Data Sheet XTREME POLYUREA XT 3500

XTREME POLYUREA XT 3500 Pure Polyurea

DESCRIPTION

Pure Polyurea XTREME POLYUREA XT 3500 is a fast set, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. It's extremely fast gel time makes it suitable for applications down to -20oF. It may be applied in single or multiple applications under minimal sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.

FEATURES
  • Excellent Thermal Stability
  • No Toxic Vapours
  • Meets USDA Criteria & Australian Standards
  • Seamless
  • Low Temperature Flexibility
  • Good Chemical Resistance
  • Coats most Metals without Primer
  • Installed with or without Reinforcement in Transitional Areas
  • Zero VOC
  • Odourless
  • 100% Solids
  • Low Permeance Rate
  • Non-Reactive
TYPICAL USES
  • Airports
  • Refineries
  • Fertiliser Plants
  • Mining Operations
  • Food Processing Plants
  • Marine Environments
  • Secondary Containment
  • Walkways and Balconies
  • Water and Waste Water Treatment
  • Industrial and Manufacturing Facilities
  • Power Plants
  • Structural Steel
  • Warehouse Floors
  • Cold Storage Facilities
  • Landfill Containment
  • Paper and Pulp Mills
  • Parking Garage Floors
COLOURS

XTREME POLYUREA XT 3500 can be tinted to various colours

COVERAGE

XTREME POLYUREA XT 3500 may be applied at any rate to achieve desired thickness. Theoretical coverage is approximately 1 Litre = 1 Sqm @ 1mm thick.

 

Xtreme Protective Coatings Pty Ltd -

Technical Data Sheet XTREME POLYUREA XT 3500

XTREME POLYUREA XT 3500 Pure Polyurea

SPRAYABLE ELASTOMER SYSTEM DESCRIPTION AND USES:

Pure Polyurea XTREME POLYUREA XT 3500 is a two component spray-in-place flexible 100% solids elastomer polyurea system. It is designed for processing through plural component high-pressure impingement-mix polyurethane dispensing equipment. XTREME POLYUREA XT 3500 is a fast cure, textured surface, multi-purpose material, designed for commercial and industrial applications not requiring rated materials. It exhibits adhesion to most materials and is suitable as a protective-abrasive-impact coating for cementatious, metal and/or wood surfaces. XTREME POLYUREA XT 3500 exhibits excellent high temperature properties up to 350F (176C).

PHYSICAL PROPERTIES @ 75F TEST METHOD VALUE
Density (pcf) ASTM-D-1622 70
Hardness (shore 'D' ) ASTM-D-2240 60
Abrasion Resistance H-18 1000 Cycles, 1Kg ASTM-D-4060 76mg
Tensile Strength (psi) ASTM-412-C 3200 +/- 200psi
Elongation (%) ASTM-412-C 500%
Tear Resistance (pli) ASTM-624-C 450
W.V.T. (grains/hr.sq.ft.) ASTM-E-96 NA
Colour Fed Std 595 B  
Mix Ratio by Volume 1A:1B  
Mix Temperature 150-160 oF  
Pot Life, at 150-160oF 2-4 Seconds  

Polyurea Development Association - DVD

Click the image to view the PDA Spray Applicator Demonstration DVD. This 4.5-minute video presentation highlights polyurea application and its advantages. Windows Media Player - 8.5Mb

Intumescent Burn Demo


"Click the image to view the 55DFR Burn Demo.
Click the image to view the PDA Spray Applicator Demonstration DVD. This 3.5-minute video presentation highlights polyurea application and its advantages. Windows Media Player - 8.5Mb Click the image to view the Burn Demo. This 1.37-minute video presentation highlights the burn protection and its advantages. Windows Media Player - 6.8Mb.

56 Delta Street
Geebung BRISBANE QLD 4034.
Phone : 07 3865 5820
Fax :    07 3865 5821		 Unit 1 / 6 Tidal Way
  Bibra Lakes PERTH WA 6163.
Phone : 08 9418 5524
Fax :    08 9418 5574

 

Home | Xtreme Advantage | Ute Liners | Ute Accessories | Vans | Trucks | Horse Floats | Trailers
On-Site Coatings | Tank Linings | Workshop Applications | Spray On Foam
Applications | Acoustic Boards | Speaker Box's | Play Equipment | Technical Information | Contact Us

Website Design by Australian Internet Solutions © 2005 - 2010Contact Us