guarantee 10018years 100Sticker Design120x

18years 100


 

XTREME POLYUREA XT 3500 Pure Polyurea-INDUSTRIAL

XTREME POLYUREA XT3500 - Pure Polyurea

DESCRIPTION

Pure Polyurea XTREME POLYUREA XT3500 is a fast set, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. It's extremely fast gel time makes it suitable for applications down to -20oF. It maybe applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures.

FEATURES
  • Excellent Thermal Stability
  • No Toxic Vapours
  • Meets USDA Criteria & Australian Standards
  • Seamless
  • Low Temperature Flexibility
  • Good Chemical Resistance
  • Coats most Metals without Primer
  • Installed with or without Reinforcement in Transitional Areas
  • Zero VOC
  • Odourless
  • 100% Solids
  • Low Permeance Rate
  • Non-Reactive
TYPICAL USES
  • Airports
  • Refineries
  • Fertiliser Plants
  • Mining Operations
  • Food Processing Plants
  • Marine Environments
  • Secondary Containment
  • Walkways and Balconies
  • Water and Waste Water Treatment
  • Industrial and Manufacturing Facilities
  • Power Plants
  • Structural Steel
  • Warehouse Floors
  • Cold Storage Facilities
  • Landfill Containment
  • Paper and Pulp Mills
  • Parking Garage Floors
COLOURS

XTREME POLYUREA XT3500 can be tinted to various colours

COVERAGE

XTREME POLYUREA XT3500 may be applied at any rate to achieve desired thickness. Theoretical coverage is approximately 1 Litre = 1 Sqm @ 1mm thick.

XTREME POLYUREA Technical Data Sheet XT 3500-INDUSTRIAL

XTREME POLYUREA XT3500 Pure Polyurea

SPRAYABLE ELASTOMER SYSTEM DESCRIPTION AND USES:

Pure Polyurea XTREME POLYUREA XT3500 is a two component spray-in-place flexible 100% solids elastomer polyurea system. It is designed for processing through plural component high-pressure impingement-mix polyurethane dispensing equipment. XTREME POLYUREA XT3500 is a fast cure, textured surface, multi-purpose material, designed for commercial and industrial applications not requiring rated materials. It exhibits adhesion to most materials and is suitable as a protective-abrasive-impact coating for cementatious, metal and/or wood surfaces. XTREME POLYUREA XT3500 exhibits excellent high temperature properties up to 350F (176C).

PHYSICAL PROPERTIES @ 75F TEST METHOD VALUE
Density (pcf) ASTM-D-1622 70
Hardness (shore 'D' ) ASTM-D-2240 60
Abrasion Resistance H-18 1000 Cycles, 1Kg ASTM-D-4060 76mg
Tensile Strength (psi) ASTM-412-C 3200 +/- 200psi
Elongation (%) ASTM-412-C 500%
Tear Resistance (pli) ASTM-624-C 450
W.V.T. (grains/hr.sq.ft.) ASTM-E-96 NA
Colour Fed Std 595 B  
Mix Ratio by Volume 1A:1B  
Mix Temperature 150-160 oF  
Pot Life, at 150-160oF 2-4 Seconds  

Click on the image for larger & higher quality version.

Pathway Industrial application at Defence Force Logistics

BEFORE

Pathway Industrial application at Defence Force Logistics

BEFORE

 

Pathway Industrial application at Defence Force Logistics

BEFORE

 

Pathway Industrial application at Defence Force Logistics

AFTER

Pathway Industrial application at Defence Force Logistics

AFTER

Concrete Pool

Concrete Pool

Blast Booth

Blast Booth

Blast Booth

Blast Booth

Coal Washing Tanks

Coal Washing Tanks

Coal Washing Tanks

Coal Washing Tanks

Non-slip, Water-Proof Membrane for Office Floor Area

Non-slip, Water-Proof Membrane for Office Floor Area

Clear Non-slip Coating over Ceramic Tiles on Pathway

Clear Non-slip Coating over Ceramic Tiles on Pathway

Polyurea Development Association - DVD

Click the image to view the PDA Spray Applicator Demonstration DVD. This 4.5-minute video presentation highlights polyurea application and its advantages. Windows Media Player - 8.5Mb
Click the image to view the PDA Spray Applicator Demonstration DVD. This 3.5-minute video presentation highlights polyurea application and its advantages. Windows Media Player - 8.5Mb

Spray on Xtreme Ute Liners PERTH -Spray on Xtreme Ute Liners BRISBANE - Spray on Xtreme Ute Liners BUNBURY - Spray on Xtreme Ute Liners SYDNEY - Spray on VAN LINER - Spray On TRUCK LINERS - Spray on BED LINERS - Xtreme Liners - Extreme Liners - Extreme Protective Coatings - Extreme Coatings - XTREME COATINGS - XTREME PROTECTIVE COATINGS 

 

 

 

 

 

More Than Just A Ute Liner!

More than just a ute liner2

 (Wheel Guards, Internal Flooring, Canopy) 

 photo

50 Metre High Power Pole, Coated in Xtreme Liner
(Click to Enlarge) 

 

New Dealers Wanted!

Xtreme Protective Coatings is Australia's leading brand of polyurea protective coating, we have extensive experience in all aspects of industrial polyurea coatings.

We have customer enquiries from all over Australia, NZ and Asia, we are actively seeking suitable candidates to become Xtreme Protective Coatings dealers.

We are looking for the right people with a technical background and drive to become a specialist in polyurea coatings.

We will in turn, provide a complete package and training to ensure you maintain the high standards that our customers expect.

Perth - Head Office

Unit 1 / 6 Tidal Way
Bibra Lake WA 6163.
P: 08 9418 5524
F: 08 9418 5574

 

facebook logo 2


button1

Brisbane

56 Delta Street
Geebung QLD 4034.
P: 07 3865 5820
F: 08 9418 5574

facebook logo 2

 

Sunshine Coast

U4/31 Enterprise St.
Kunda Park, QLD 4556
P:  07 5456 2577
M: 0419 732 566


facebook logo 2

 

 

Bunbury

Unit 3/89 Albert Road
Bunbury WA 6230
P: 08 9418 5524
F: 08 9418 5574


facebook logo 2